dmesg - xeon x264

Return To xeon x264 System Information

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.16.0-4-amd64 (debian-kernel@lists.debian.org) (gcc version 4.8.4 (Debian 4.8.4-1) ) #1 SMP Debian 3.16.7-ckt25-2 (2016-04-08)
Command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/zakel--vg-root ro quiet
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009ffff] usable
BIOS-e820: [mem 0x0000000000100000-0x000000007850bfff] usable
BIOS-e820: [mem 0x000000007850c000-0x00000000796c2fff] reserved
BIOS-e820: [mem 0x00000000796c3000-0x00000000797bafff] usable
BIOS-e820: [mem 0x00000000797bb000-0x0000000079b9bfff] ACPI NVS
BIOS-e820: [mem 0x0000000079b9c000-0x000000007bcadfff] reserved
BIOS-e820: [mem 0x000000007bcae000-0x000000007bd0afff] type 20
BIOS-e820: [mem 0x000000007bd0b000-0x000000007bd0bfff] usable
BIOS-e820: [mem 0x000000007bd0c000-0x000000007bd91fff] reserved
BIOS-e820: [mem 0x000000007bd92000-0x000000007bffffff] usable
BIOS-e820: [mem 0x000000007c000000-0x000000008fffffff] reserved
BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed44fff] reserved
BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
BIOS-e820: [mem 0x0000000100000000-0x000000087fffffff] usable
NX (Execute Disable) protection: active
efi: EFI v2.40 by American Megatrends
efi:  ACPI=0x79807000  ACPI 2.0=0x79807000  SMBIOS=0xf05e0  MPS=0xfca30 
efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000003f000) (0MB)
efi: mem02: type=4, attr=0xf, range=[0x000000000003f000-0x0000000000040000) (0MB)
efi: mem03: type=3, attr=0xf, range=[0x0000000000040000-0x00000000000a0000) (0MB)
efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001018000) (15MB)
efi: mem05: type=7, attr=0xf, range=[0x0000000001018000-0x0000000001200000) (1MB)
efi: mem06: type=2, attr=0xf, range=[0x0000000001200000-0x0000000002118000) (15MB)
efi: mem07: type=7, attr=0xf, range=[0x0000000002118000-0x0000000036168000) (832MB)
efi: mem08: type=2, attr=0xf, range=[0x0000000036168000-0x00000000370ac000) (15MB)
efi: mem09: type=7, attr=0xf, range=[0x00000000370ac000-0x0000000048456000) (275MB)
efi: mem10: type=2, attr=0xf, range=[0x0000000048456000-0x0000000065601000) (465MB)
efi: mem11: type=4, attr=0xf, range=[0x0000000065601000-0x0000000065681000) (0MB)
efi: mem12: type=7, attr=0xf, range=[0x0000000065681000-0x00000000744a8000) (238MB)
efi: mem13: type=1, attr=0xf, range=[0x00000000744a8000-0x00000000744c6000) (0MB)
efi: mem14: type=4, attr=0xf, range=[0x00000000744c6000-0x0000000077f0c000) (58MB)
efi: mem15: type=7, attr=0xf, range=[0x0000000077f0c000-0x00000000781a1000) (2MB)
efi: mem16: type=3, attr=0xf, range=[0x00000000781a1000-0x000000007850c000) (3MB)
efi: mem17: type=0, attr=0xf, range=[0x000000007850c000-0x00000000796c3000) (17MB)
efi: mem18: type=7, attr=0xf, range=[0x00000000796c3000-0x00000000797b1000) (0MB)
efi: mem19: type=2, attr=0xf, range=[0x00000000797b1000-0x00000000797bb000) (0MB)
efi: mem20: type=10, attr=0xf, range=[0x00000000797bb000-0x0000000079b9c000) (3MB)
efi: mem21: type=6, attr=0x800000000000000f, range=[0x0000000079b9c000-0x000000007bcae000) (33MB)
efi: mem22: type=5, attr=0x800000000000000f, range=[0x000000007bcae000-0x000000007bd0b000) (0MB)
efi: mem23: type=4, attr=0xf, range=[0x000000007bd0b000-0x000000007bd0c000) (0MB)
efi: mem24: type=6, attr=0x800000000000000f, range=[0x000000007bd0c000-0x000000007bd92000) (0MB)
efi: mem25: type=4, attr=0xf, range=[0x000000007bd92000-0x000000007c000000) (2MB)
efi: mem26: type=7, attr=0xf, range=[0x0000000100000000-0x0000000880000000) (30720MB)
efi: mem27: type=0, attr=0x0, range=[0x000000007c000000-0x0000000080000000) (64MB)
efi: mem28: type=11, attr=0x8000000000000001, range=[0x0000000080000000-0x0000000090000000) (256MB)
efi: mem29: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed45000) (0MB)
efi: mem30: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
SMBIOS 0.0 present.
DMI: GIGABYTE MU70-SU0/MU70-SU0, BIOS R01 03/16/2016
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
AGP: No AGP bridge found
e820: last_pfn = 0x880000 max_arch_pfn = 0x400000000
MTRR default type: write-back
MTRR fixed ranges enabled:
  00000-9FFFF write-back
  A0000-BFFFF uncachable
  C0000-FFFFF write-protect
MTRR variable ranges enabled:
  0 base 000080000000 mask 3FFF80000000 uncachable
  1 base 380000000000 mask 3FC000000000 uncachable
  2 disabled
  3 disabled
  4 disabled
  5 disabled
  6 disabled
  7 disabled
  8 disabled
  9 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820: last_pfn = 0x7c000 max_arch_pfn = 0x400000000
found SMP MP-table at [mem 0x000fcd60-0x000fcd6f] mapped at [ffff8800000fcd60]
Base memory trampoline at [ffff880000097000] 97000 size 24576
Using GB pages for direct mapping
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01cf4000, 0x01cf4fff] PGTABLE
BRK [0x01cf5000, 0x01cf5fff] PGTABLE
BRK [0x01cf6000, 0x01cf6fff] PGTABLE
init_memory_mapping: [mem 0x87fe00000-0x87fffffff]
 [mem 0x87fe00000-0x87fffffff] page 1G
init_memory_mapping: [mem 0x87c000000-0x87fdfffff]
 [mem 0x87c000000-0x87fdfffff] page 1G
init_memory_mapping: [mem 0x800000000-0x87bffffff]
 [mem 0x800000000-0x87bffffff] page 1G
init_memory_mapping: [mem 0x00100000-0x7850bfff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x783fffff] page 2M
 [mem 0x78400000-0x7850bfff] page 4k
init_memory_mapping: [mem 0x796c3000-0x797bafff]
 [mem 0x796c3000-0x797bafff] page 4k
BRK [0x01cf7000, 0x01cf7fff] PGTABLE
init_memory_mapping: [mem 0x7bd0b000-0x7bd0bfff]
 [mem 0x7bd0b000-0x7bd0bfff] page 4k
BRK [0x01cf8000, 0x01cf8fff] PGTABLE
init_memory_mapping: [mem 0x7bd92000-0x7bffffff]
 [mem 0x7bd92000-0x7bdfffff] page 4k
 [mem 0x7be00000-0x7bffffff] page 2M
init_memory_mapping: [mem 0x100000000-0x7ffffffff]
 [mem 0x100000000-0x7ffffffff] page 1G
RAMDISK: [mem 0x36168000-0x370abfff]
ACPI: Early table checksum verification disabled
ACPI: RSDP 0x0000000079807000 000024 (v02 ALASKA)
ACPI: XSDT 0x00000000798070A8 0000CC (v01 GBT    GBTUACPI 01072009 AMI  00010013)
ACPI: FACP 0x0000000079839880 00010C (v05 GBT    GBTUACPI 01072009 AMI  00010013)
ACPI: DSDT 0x0000000079807208 032672 (v02 GBT    GBTUACPI 01072009 INTL 20091013)
ACPI: FACS 0x0000000079B9AF80 000040
ACPI: APIC 0x0000000079839990 000100 (v03 GBT    GBTUACPI 01072009 AMI  00010013)
ACPI: FPDT 0x0000000079839A90 000044 (v01 GBT    GBTUACPI 01072009 AMI  00010013)
ACPI: FIDT 0x0000000079839AD8 00009C (v01 GBT    GBTUACPI 01072009 AMI  00010013)
ACPI: SPMI 0x0000000079839B78 000041 (v05 GBT    GBTUACPI 00000000 AMI. 00000000)
ACPI: MCFG 0x0000000079839BC0 00003C (v01 GBT    GBTUACPI 01072009 MSFT 00000097)
ACPI: UEFI 0x0000000079839C00 000042 (v01 GBT    GBTUACPI 01072009      00000000)
ACPI: HPET 0x0000000079839C48 000038 (v01 GBT    GBTUACPI 00000001 INTL 20091013)
ACPI: MSCT 0x0000000079839C80 000090 (v01 GBT    GBTUACPI 00000001 INTL 20091013)
ACPI: SLIT 0x0000000079839D10 00002D (v01 GBT    GBTUACPI 00000001 INTL 20091013)
ACPI: SRAT 0x0000000079839D40 001158 (v03 GBT    GBTUACPI 00000001 INTL 20091013)
ACPI: WDDT 0x000000007983AE98 000040 (v01 GBT    GBTUACPI 00000000 INTL 20091013)
ACPI: SSDT 0x000000007983AED8 0170C7 (v02 GBT    GBTUACPI 00000001 INTL 20120913)
ACPI: SSDT 0x0000000079851FA0 00264A (v02 GBT    GBTUACPI 00000002 INTL 20120913)
ACPI: SSDT 0x00000000798545F0 000064 (v02 GBT    GBTUACPI 00000002 INTL 20120913)
ACPI: PRAD 0x0000000079854658 000102 (v02 ALASKA A M I    00000002 INTL 20120913)
ACPI: DMAR 0x0000000079854760 0000BC (v01 GBT    GBTUACPI 00000001 INTL 20091013)
ACPI: HEST 0x0000000079854820 0000A8 (v01 GBT    GBTUACPI 00000001 INTL 00000001)
ACPI: BERT 0x00000000798548C8 000030 (v01 GBT    GBTUACPI 00000001 INTL 00000001)
ACPI: ERST 0x00000000798548F8 000230 (v01 GBT    GBTUACPI 00000001 INTL 00000001)
ACPI: EINJ 0x0000000079854B28 000130 (v01 GBT    GBTUACPI 00000001 INTL 00000001)
ACPI: Local APIC address 0xfee00000
SRAT: PXM 0 -> APIC 0x00 -> Node 0
SRAT: PXM 0 -> APIC 0x02 -> Node 0
SRAT: PXM 0 -> APIC 0x04 -> Node 0
SRAT: PXM 0 -> APIC 0x06 -> Node 0
SRAT: PXM 0 -> APIC 0x08 -> Node 0
SRAT: PXM 0 -> APIC 0x0a -> Node 0
SRAT: PXM 0 -> APIC 0x01 -> Node 0
SRAT: PXM 0 -> APIC 0x03 -> Node 0
SRAT: PXM 0 -> APIC 0x05 -> Node 0
SRAT: PXM 0 -> APIC 0x07 -> Node 0
SRAT: PXM 0 -> APIC 0x09 -> Node 0
SRAT: PXM 0 -> APIC 0x0b -> Node 0
SRAT: Node 0 PXM 0 [mem 0x00000000-0x7fffffff]
SRAT: Node 0 PXM 0 [mem 0x100000000-0x87fffffff]
NUMA: Initialized distance table, cnt=1
NUMA: Node 0 [mem 0x00000000-0x7fffffff] + [mem 0x100000000-0x87fffffff] -> [mem 0x00000000-0x87fffffff]
Initmem setup node 0 [mem 0x00000000-0x87fffffff]
  NODE_DATA [mem 0x87fff8000-0x87fffcfff]
 [ffffea0000000000-ffffea001dbfffff] PMD -> [ffff88085f600000-ffff88087b5fffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   [mem 0x100000000-0x87fffffff]
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009ffff]
  node   0: [mem 0x00100000-0x7850bfff]
  node   0: [mem 0x796c3000-0x797bafff]
  node   0: [mem 0x7bd0b000-0x7bd0bfff]
  node   0: [mem 0x7bd92000-0x7bffffff]
  node   0: [mem 0x100000000-0x87fffffff]
On node 0 totalpages: 8357906
  DMA zone: 56 pages used for memmap
  DMA zone: 26 pages reserved
  DMA zone: 3999 pages, LIFO batch:0
  DMA32 zone: 6694 pages used for memmap
  DMA32 zone: 489587 pages, LIFO batch:31
  Normal zone: 107520 pages used for memmap
  Normal zone: 7864320 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x408
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] enabled)
ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] enabled)
ACPI: LAPIC (acpi_id[0x08] lapic_id[0x08] enabled)
ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x0a] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] enabled)
ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] enabled)
ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] enabled)
ACPI: LAPIC (acpi_id[0x09] lapic_id[0x09] enabled)
ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x0b] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x04] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x06] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x08] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0a] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x05] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x07] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x09] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x0b] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: IOAPIC (id[0x02] address[0xfec01000] gsi_base[24])
IOAPIC[1]: apic_id 2, version 32, address 0xfec01000, GSI 24-47
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a701 base: 0xfed00000
smpboot: Allowing 12 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 64
PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
PM: Registered nosave memory: [mem 0x7850c000-0x796c2fff]
PM: Registered nosave memory: [mem 0x797bb000-0x79b9bfff]
PM: Registered nosave memory: [mem 0x79b9c000-0x7bcadfff]
PM: Registered nosave memory: [mem 0x7bcae000-0x7bd0afff]
PM: Registered nosave memory: [mem 0x7bd0c000-0x7bd91fff]
PM: Registered nosave memory: [mem 0x7c000000-0x8fffffff]
PM: Registered nosave memory: [mem 0x90000000-0xfed1bfff]
PM: Registered nosave memory: [mem 0xfed1c000-0xfed44fff]
PM: Registered nosave memory: [mem 0xfed45000-0xfeffffff]
PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
e820: [mem 0x90000000-0xfed1bfff] available for PCI devices
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:512 nr_cpumask_bits:512 nr_cpu_ids:12 nr_node_ids:1
PERCPU: Embedded 27 pages/cpu @ffff88087fc00000 s80896 r8192 d21504 u131072
pcpu-alloc: s80896 r8192 d21504 u131072 alloc=1*2097152
pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 8243610
Policy zone: Normal
Kernel command line: BOOT_IMAGE=/vmlinuz-3.16.0-4-amd64 root=/dev/mapper/zakel--vg-root ro quiet
PID hash table entries: 4096 (order: 3, 32768 bytes)
xsave: enabled xstate_bv 0x7, cntxt size 0x340
AGP: Checking aperture...
AGP: No AGP bridge found
Calgary: detecting Calgary via BIOS EBDA area
Calgary: Unable to locate Rio Grande table in EBDA - bailing!
Memory: 32812080K/33431624K available (5222K kernel code, 947K rwdata, 1836K rodata, 1204K init, 840K bss, 619544K reserved)
Hierarchical RCU implementation.
	RCU dyntick-idle grace-period acceleration is enabled.
	RCU restricting CPUs from NR_CPUS=512 to nr_cpu_ids=12.
RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=12
NR_IRQS:33024 nr_irqs:1184 16
Console: colour dummy device 80x25
console [tty0] enabled
hpet clockevent registered
tsc: Fast TSC calibration using PIT
tsc: Detected 2399.981 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4799.96 BogoMIPS (lpj=9599924)
pid_max: default: 32768 minimum: 301
ACPI: Core revision 20140424
ACPI: All ACPI Tables successfully acquired
Security Framework initialized
AppArmor: AppArmor disabled by boot time parameter
Yama: disabled by default; enable with sysctl kernel.yama.*
Dentry cache hash table entries: 4194304 (order: 13, 33554432 bytes)
Inode-cache hash table entries: 2097152 (order: 12, 16777216 bytes)
Mount-cache hash table entries: 65536 (order: 7, 524288 bytes)
Mountpoint-cache hash table entries: 65536 (order: 7, 524288 bytes)
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
Initializing cgroup subsys net_prio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
mce: CPU supports 22 MCE banks
CPU0: Thermal monitoring enabled (TM1)
process: using mwait in idle threads
Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
tlb_flushall_shift: 6
Freeing SMP alternatives memory: 20K (ffffffff81a1b000 - ffffffff81a20000)
ftrace: allocating 21683 entries in 85 pages
dmar: Host address width 46
dmar: DRHD base: 0x000000fbffc000 flags: 0x1
dmar: IOMMU 0: reg_base_addr fbffc000 ver 1:0 cap d2078c106f0466 ecap f020df
dmar: RMRR base: 0x0000007bb82000 end: 0x0000007bb92fff
dmar: ATSR flags: 0x0
dmar: RHSA base: 0x000000fbffc000 proximity domain: 0x0
IOAPIC id 1 under DRHD base  0xfbffc000 IOMMU 0
IOAPIC id 2 under DRHD base  0xfbffc000 IOMMU 0
HPET id 0 under DRHD base 0xfbffc000
Queued invalidation will be enabled to support x2apic and Intr-remapping.
Your BIOS is broken and requested that x2apic be disabled.
This will slightly decrease performance.
Use 'intremap=no_x2apic_optout' to override BIOS request.
Enabled IRQ remapping in xapic mode
x2apic not enabled, IRQ remapping is in xapic mode
Switched APIC routing to physical flat.
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Xeon(R) CPU E5-2620 v3 @ 2.40GHz (fam: 06, model: 3f, stepping: 02)
TSC deadline timer enabled
Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
... version:                3
... bit width:              48
... generic registers:      4
... value mask:             0000ffffffffffff
... max period:             0000ffffffffffff
... fixed-purpose events:   3
... event mask:             000000070000000f
x86: Booting SMP configuration:
.... node  #0, CPUs:        #1
NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
  #2  #3  #4  #5  #6  #7  #8  #9 #10 #11
x86: Booted up 1 node, 12 CPUs
smpboot: Total of 12 processors activated (57599.54 BogoMIPS)
devtmpfs: initialized
PM: Registering ACPI NVS region [mem 0x797bb000-0x79b9bfff] (4067328 bytes)
pinctrl core: initialized pinctrl subsystem
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
ACPI: bus type PCI registered
acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0x80000000-0x8fffffff] (base 0x80000000)
PCI: MMCONFIG at [mem 0x80000000-0x8fffffff] reserved in E820
PCI: Using configuration type 1 for base access
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
[Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
ACPI: Dynamic OEM Table Load:
ACPI: PRAD 0x0000000000000000 000102 (v02 ALASKA A M I    00000002 INTL 20120913)
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20140424/hwxface-580)
ACPI: (supports S0 S4 S5)
ACPI: Using IOAPIC for interrupt routing
HEST: Table parsing has been initialized.
PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
ACPI: PCI Root Bridge [UNC0] (domain 0000 [bus ff])
acpi PNP0A03:03: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A03:03: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:ff
pci_bus 0000:ff: root bus resource [bus ff]
pci 0000:ff:0b.0: [8086:2f81] type 00 class 0x088000
pci 0000:ff:0b.1: [8086:2f36] type 00 class 0x110100
pci 0000:ff:0b.2: [8086:2f37] type 00 class 0x110100
pci 0000:ff:0c.0: [8086:2fe0] type 00 class 0x088000
pci 0000:ff:0c.1: [8086:2fe1] type 00 class 0x088000
pci 0000:ff:0c.2: [8086:2fe2] type 00 class 0x088000
pci 0000:ff:0c.3: [8086:2fe3] type 00 class 0x088000
pci 0000:ff:0c.4: [8086:2fe4] type 00 class 0x088000
pci 0000:ff:0c.5: [8086:2fe5] type 00 class 0x088000
pci 0000:ff:0f.0: [8086:2ff8] type 00 class 0x088000
pci 0000:ff:0f.1: [8086:2ff9] type 00 class 0x088000
pci 0000:ff:0f.4: [8086:2ffc] type 00 class 0x088000
pci 0000:ff:0f.5: [8086:2ffd] type 00 class 0x088000
pci 0000:ff:0f.6: [8086:2ffe] type 00 class 0x088000
pci 0000:ff:10.0: [8086:2f1d] type 00 class 0x088000
pci 0000:ff:10.1: [8086:2f34] type 00 class 0x110100
pci 0000:ff:10.5: [8086:2f1e] type 00 class 0x088000
pci 0000:ff:10.6: [8086:2f7d] type 00 class 0x110100
pci 0000:ff:10.7: [8086:2f1f] type 00 class 0x088000
pci 0000:ff:12.0: [8086:2fa0] type 00 class 0x088000
pci 0000:ff:12.1: [8086:2f30] type 00 class 0x110100
pci 0000:ff:13.0: [8086:2fa8] type 00 class 0x088000
pci 0000:ff:13.1: [8086:2f71] type 00 class 0x088000
pci 0000:ff:13.2: [8086:2faa] type 00 class 0x088000
pci 0000:ff:13.3: [8086:2fab] type 00 class 0x088000
pci 0000:ff:13.4: [8086:2fac] type 00 class 0x088000
pci 0000:ff:13.5: [8086:2fad] type 00 class 0x088000
pci 0000:ff:13.6: [8086:2fae] type 00 class 0x088000
pci 0000:ff:13.7: [8086:2faf] type 00 class 0x088000
pci 0000:ff:14.0: [8086:2fb0] type 00 class 0x088000
pci 0000:ff:14.1: [8086:2fb1] type 00 class 0x088000
pci 0000:ff:14.2: [8086:2fb2] type 00 class 0x088000
pci 0000:ff:14.3: [8086:2fb3] type 00 class 0x088000
pci 0000:ff:14.4: [8086:2fbc] type 00 class 0x088000
pci 0000:ff:14.5: [8086:2fbd] type 00 class 0x088000
pci 0000:ff:14.6: [8086:2fbe] type 00 class 0x088000
pci 0000:ff:14.7: [8086:2fbf] type 00 class 0x088000
pci 0000:ff:15.0: [8086:2fb4] type 00 class 0x088000
pci 0000:ff:15.1: [8086:2fb5] type 00 class 0x088000
pci 0000:ff:15.2: [8086:2fb6] type 00 class 0x088000
pci 0000:ff:15.3: [8086:2fb7] type 00 class 0x088000
pci 0000:ff:16.0: [8086:2f68] type 00 class 0x088000
pci 0000:ff:16.6: [8086:2f6e] type 00 class 0x088000
pci 0000:ff:16.7: [8086:2f6f] type 00 class 0x088000
pci 0000:ff:17.0: [8086:2fd0] type 00 class 0x088000
pci 0000:ff:17.4: [8086:2fb8] type 00 class 0x088000
pci 0000:ff:17.5: [8086:2fb9] type 00 class 0x088000
pci 0000:ff:17.6: [8086:2fba] type 00 class 0x088000
pci 0000:ff:17.7: [8086:2fbb] type 00 class 0x088000
pci 0000:ff:1e.0: [8086:2f98] type 00 class 0x088000
pci 0000:ff:1e.1: [8086:2f99] type 00 class 0x088000
pci 0000:ff:1e.2: [8086:2f9a] type 00 class 0x088000
pci 0000:ff:1e.3: [8086:2fc0] type 00 class 0x088000
pci 0000:ff:1e.4: [8086:2f9c] type 00 class 0x088000
pci 0000:ff:1f.0: [8086:2f88] type 00 class 0x088000
pci 0000:ff:1f.2: [8086:2f8a] type 00 class 0x088000
acpi PNP0A03:03: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-fe])
acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-fe]
pci_bus 0000:00: root bus resource [io  0x0000-0x0cf7]
pci_bus 0000:00: root bus resource [io  0x1000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: root bus resource [mem 0x90000000-0xfbffbfff]
pci 0000:00:00.0: [8086:2f00] type 00 class 0x060000
pci 0000:00:01.0: [8086:2f02] type 01 class 0x060400
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: System wakeup disabled by ACPI
pci 0000:00:03.0: [8086:2f08] type 01 class 0x060400
pci 0000:00:03.0: PME# supported from D0 D3hot D3cold
pci 0000:00:03.0: System wakeup disabled by ACPI
pci 0000:00:05.0: [8086:2f28] type 00 class 0x088000
pci 0000:00:05.1: [8086:2f29] type 00 class 0x088000
pci 0000:00:05.2: [8086:2f2a] type 00 class 0x088000
pci 0000:00:05.4: [8086:2f2c] type 00 class 0x080020
pci 0000:00:05.4: reg 0x10: [mem 0xfb618000-0xfb618fff]
pci 0000:00:11.0: [8086:8d7c] type 00 class 0xff0000
pci 0000:00:14.0: [8086:8d31] type 00 class 0x0c0330
pci 0000:00:14.0: reg 0x10: [mem 0xfb600000-0xfb60ffff 64bit]
pci 0000:00:14.0: PME# supported from D3hot D3cold
pci 0000:00:14.0: System wakeup disabled by ACPI
pci 0000:00:16.0: [8086:8d3a] type 00 class 0x078000
pci 0000:00:16.0: reg 0x10: [mem 0xfb617000-0xfb61700f 64bit]
pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
pci 0000:00:16.1: [8086:8d3b] type 00 class 0x078000
pci 0000:00:16.1: reg 0x10: [mem 0xfb616000-0xfb61600f 64bit]
pci 0000:00:16.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: [8086:8d2d] type 00 class 0x0c0320
pci 0000:00:1a.0: reg 0x10: [mem 0xfb614000-0xfb6143ff]
pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: [8086:8d10] type 01 class 0x060400
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: [8086:8d12] type 01 class 0x060400
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: System wakeup disabled by ACPI
pci 0000:00:1c.2: [8086:8d14] type 01 class 0x060400
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: System wakeup disabled by ACPI
pci 0000:00:1c.3: [8086:8d16] type 01 class 0x060400
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: System wakeup disabled by ACPI
pci 0000:00:1c.6: [8086:8d1c] type 01 class 0x060400
pci 0000:00:1c.6: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.6: System wakeup disabled by ACPI
pci 0000:00:1c.7: [8086:8d1e] type 01 class 0x060400
pci 0000:00:1c.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.7: System wakeup disabled by ACPI
pci 0000:00:1d.0: [8086:8d26] type 00 class 0x0c0320
pci 0000:00:1d.0: reg 0x10: [mem 0xfb613000-0xfb6133ff]
pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.0: System wakeup disabled by ACPI
pci 0000:00:1f.0: [8086:8d44] type 00 class 0x060100
pci 0000:00:1f.2: [8086:8d02] type 00 class 0x010601
pci 0000:00:1f.2: reg 0x10: [io  0xf050-0xf057]
pci 0000:00:1f.2: reg 0x14: [io  0xf040-0xf043]
pci 0000:00:1f.2: reg 0x18: [io  0xf030-0xf037]
pci 0000:00:1f.2: reg 0x1c: [io  0xf020-0xf023]
pci 0000:00:1f.2: reg 0x20: [io  0xf000-0xf01f]
pci 0000:00:1f.2: reg 0x24: [mem 0xfb612000-0xfb6127ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.3: [8086:8d22] type 00 class 0x0c0500
pci 0000:00:1f.3: reg 0x10: [mem 0xfb611000-0xfb6110ff 64bit]
pci 0000:00:1f.3: reg 0x20: [io  0x0580-0x059f]
pci 0000:00:1f.6: [8086:8d24] type 00 class 0x118000
pci 0000:00:1f.6: reg 0x10: [mem 0xfb610000-0xfb610fff 64bit]
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:03:00.0: [8086:1533] type 00 class 0x020000
pci 0000:03:00.0: reg 0x10: [mem 0xfb500000-0xfb57ffff]
pci 0000:03:00.0: reg 0x18: [io  0xe000-0xe01f]
pci 0000:03:00.0: reg 0x1c: [mem 0xfb580000-0xfb583fff]
pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
pci 0000:03:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:04:00.0: [8086:1533] type 00 class 0x020000
pci 0000:04:00.0: reg 0x10: [mem 0xfb400000-0xfb47ffff]
pci 0000:04:00.0: reg 0x18: [io  0xd000-0xd01f]
pci 0000:04:00.0: reg 0x1c: [mem 0xfb480000-0xfb483fff]
pci 0000:04:00.0: PME# supported from D0 D3hot D3cold
pci 0000:04:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.1:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:05:00.0: [8086:1533] type 00 class 0x020000
pci 0000:05:00.0: reg 0x10: [mem 0xfb300000-0xfb37ffff]
pci 0000:05:00.0: reg 0x18: [io  0xc000-0xc01f]
pci 0000:05:00.0: reg 0x1c: [mem 0xfb380000-0xfb383fff]
pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
pci 0000:05:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.2:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:06:00.0: [8086:1533] type 00 class 0x020000
pci 0000:06:00.0: reg 0x10: [mem 0xfb200000-0xfb27ffff]
pci 0000:06:00.0: reg 0x18: [io  0xb000-0xb01f]
pci 0000:06:00.0: reg 0x1c: [mem 0xfb280000-0xfb283fff]
pci 0000:06:00.0: PME# supported from D0 D3hot D3cold
pci 0000:06:00.0: System wakeup disabled by ACPI
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.3:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:07:00.0: [1b6f:7052] type 00 class 0x0c0330
pci 0000:07:00.0: reg 0x10: [mem 0xfb100000-0xfb107fff 64bit]
pci 0000:07:00.0: supports D1 D2
pci 0000:07:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:00:1c.6:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:08:00.0: [1a03:1150] type 01 class 0x060400
pci 0000:08:00.0: supports D1 D2
pci 0000:08:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:00:1c.7: PCI bridge to [bus 08-09]
pci 0000:00:1c.7:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.7:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:09:00.0: [1a03:2000] type 00 class 0x030000
pci 0000:09:00.0: reg 0x10: [mem 0xfa000000-0xfaffffff]
pci 0000:09:00.0: reg 0x14: [mem 0xfb000000-0xfb01ffff]
pci 0000:09:00.0: reg 0x18: [io  0xa000-0xa07f]
pci 0000:09:00.0: supports D1 D2
pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:09:00.0: System wakeup disabled by ACPI
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0:   bridge window [io  0xa000-0xafff]
pci 0000:08:00.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: on NUMA node 0
acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
ACPI: Enabled 3 GPEs in block 00 to 3F
vgaarb: setting as boot device: PCI:0000:09:00.0
vgaarb: device added: PCI:0000:09:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:09:00.0
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x7850c000-0x7bffffff]
e820: reserve RAM buffer [mem 0x797bb000-0x7bffffff]
e820: reserve RAM buffer [mem 0x7bd0c000-0x7bffffff]
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
hpet0: 8 comparators, 64-bit 14.318180 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
system 00:01: [io  0x0500-0x057f] has been reserved
system 00:01: [io  0x0400-0x047f] could not be reserved
system 00:01: [io  0x0580-0x059f] has been reserved
system 00:01: [io  0x0600-0x061f] has been reserved
system 00:01: [io  0x0880-0x0883] has been reserved
system 00:01: [io  0x0800-0x081f] has been reserved
system 00:01: [mem 0xfed1c000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8bfff] has been reserved
system 00:01: [mem 0xff000000-0xffffffff] has been reserved
system 00:01: [mem 0xfee00000-0xfeefffff] has been reserved
system 00:01: [mem 0xfed12000-0xfed1200f] has been reserved
system 00:01: [mem 0xfed12010-0xfed1201f] has been reserved
system 00:01: [mem 0xfed1b000-0xfed1bfff] has been reserved
system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:03: [dma 0 disabled]
pnp 00:03: Plug and Play ACPI device, IDs PNP0501 (active)
pnp 00:04: [dma 0 disabled]
pnp 00:04: Plug and Play ACPI device, IDs PNP0501 (active)
system 00:05: [io  0x0a00-0x0a1f] has been reserved
system 00:05: [io  0x0a20-0x0a2f] has been reserved
system 00:05: [io  0x0a30-0x0a3f] has been reserved
system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
pnp 00:06: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
pnp 00:07: Plug and Play ACPI device, IDs IPI0001 (active)
pnp: PnP ACPI: found 8 devices
ACPI: bus type PNP unregistered
pci 0000:00:01.0: PCI bridge to [bus 01]
pci 0000:00:03.0: PCI bridge to [bus 02]
pci 0000:00:1c.0: PCI bridge to [bus 03]
pci 0000:00:1c.0:   bridge window [io  0xe000-0xefff]
pci 0000:00:1c.0:   bridge window [mem 0xfb500000-0xfb5fffff]
pci 0000:00:1c.1: PCI bridge to [bus 04]
pci 0000:00:1c.1:   bridge window [io  0xd000-0xdfff]
pci 0000:00:1c.1:   bridge window [mem 0xfb400000-0xfb4fffff]
pci 0000:00:1c.2: PCI bridge to [bus 05]
pci 0000:00:1c.2:   bridge window [io  0xc000-0xcfff]
pci 0000:00:1c.2:   bridge window [mem 0xfb300000-0xfb3fffff]
pci 0000:00:1c.3: PCI bridge to [bus 06]
pci 0000:00:1c.3:   bridge window [io  0xb000-0xbfff]
pci 0000:00:1c.3:   bridge window [mem 0xfb200000-0xfb2fffff]
pci 0000:00:1c.6: PCI bridge to [bus 07]
pci 0000:00:1c.6:   bridge window [mem 0xfb100000-0xfb1fffff]
pci 0000:08:00.0: PCI bridge to [bus 09]
pci 0000:08:00.0:   bridge window [io  0xa000-0xafff]
pci 0000:08:00.0:   bridge window [mem 0xfa000000-0xfb0fffff]
pci 0000:00:1c.7: PCI bridge to [bus 08-09]
pci 0000:00:1c.7:   bridge window [io  0xa000-0xafff]
pci 0000:00:1c.7:   bridge window [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:00: resource 4 [io  0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io  0x1000-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x90000000-0xfbffbfff]
pci_bus 0000:03: resource 0 [io  0xe000-0xefff]
pci_bus 0000:03: resource 1 [mem 0xfb500000-0xfb5fffff]
pci_bus 0000:04: resource 0 [io  0xd000-0xdfff]
pci_bus 0000:04: resource 1 [mem 0xfb400000-0xfb4fffff]
pci_bus 0000:05: resource 0 [io  0xc000-0xcfff]
pci_bus 0000:05: resource 1 [mem 0xfb300000-0xfb3fffff]
pci_bus 0000:06: resource 0 [io  0xb000-0xbfff]
pci_bus 0000:06: resource 1 [mem 0xfb200000-0xfb2fffff]
pci_bus 0000:07: resource 1 [mem 0xfb100000-0xfb1fffff]
pci_bus 0000:08: resource 0 [io  0xa000-0xafff]
pci_bus 0000:08: resource 1 [mem 0xfa000000-0xfb0fffff]
pci_bus 0000:09: resource 0 [io  0xa000-0xafff]
pci_bus 0000:09: resource 1 [mem 0xfa000000-0xfb0fffff]
NET: Registered protocol family 2
TCP established hash table entries: 262144 (order: 9, 2097152 bytes)
TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
TCP: Hash tables configured (established 262144 bind 65536)
TCP: reno registered
UDP hash table entries: 16384 (order: 7, 524288 bytes)
UDP-Lite hash table entries: 16384 (order: 7, 524288 bytes)
NET: Registered protocol family 1
pci 0000:09:00.0: Video device with shadowed ROM
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 15632K (ffff880036168000 - ffff8800370ac000)
PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
software IO TLB [mem 0x704c6000-0x744c6000] (64MB) mapped at [ffff8800704c6000-ffff8800744c5fff]
microcode: CPU0 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU1 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU2 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU3 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU4 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU5 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU6 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU7 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU8 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU9 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU10 sig=0x306f2, pf=0x1, revision=0x36
microcode: CPU11 sig=0x306f2, pf=0x1, revision=0x36
microcode: Microcode Update Driver: v2.00 , Peter Oruba
simple-framebuffer simple-framebuffer.0: framebuffer at 0xfa000000, 0x1d5000 bytes, mapped to 0xffffc90013680000
simple-framebuffer simple-framebuffer.0: format=a8r8g8b8, mode=800x600x32, linelength=3200
Console: switching to colour frame buffer device 100x37
simple-framebuffer simple-framebuffer.0: fb0: simplefb registered!
futex hash table entries: 4096 (order: 6, 262144 bytes)
audit: initializing netlink subsys (disabled)
audit: type=2000 audit(1460764421.792:1): initialized
HugeTLB registered 2 MB page size, pre-allocated 0 pages
zbud: loaded
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
msgmni has been set to 32768
alg: No test for stdrng (krng)
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
pcieport 0000:00:01.0: irq 65 for MSI/MSI-X
pcieport 0000:00:03.0: irq 66 for MSI/MSI-X
pcieport 0000:00:1c.0: irq 67 for MSI/MSI-X
pcieport 0000:00:1c.1: irq 68 for MSI/MSI-X
pcieport 0000:00:1c.2: irq 69 for MSI/MSI-X
pcieport 0000:00:1c.3: irq 70 for MSI/MSI-X
pcieport 0000:00:1c.6: irq 71 for MSI/MSI-X
pcieport 0000:00:1c.7: irq 72 for MSI/MSI-X
aer 0000:00:01.0:pcie02: service driver aer loaded
aer 0000:00:03.0:pcie02: service driver aer loaded
pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:03.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:03.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
pci 0000:03:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
pci 0000:06:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.6: Signaling PME through PCIe PME interrupt
pci 0000:07:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.6:pcie01: service driver pcie_pme loaded
pcieport 0000:00:1c.7: Signaling PME through PCIe PME interrupt
pci 0000:08:00.0: Signaling PME through PCIe PME interrupt
pci 0000:09:00.0: Signaling PME through PCIe PME interrupt
pcie_pme 0000:00:1c.7:pcie01: service driver pcie_pme loaded
ioapic: probe of 0000:00:05.4 failed with error -22
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: MWAIT substates: 0x2120
intel_idle: v0.4 model 0x3F
intel_idle: lapic_timer_reliable_states 0xffffffff
ERST: Error Record Serialization Table (ERST) support is initialized.
pstore: Registered erst as persistent store backend
GHES: APEI firmware first mode is enabled by APEI bit and WHEA _OSC.
00:03: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
00:04: ttyS1 at I/O 0x2f8 (irq = 3, base_baud = 115200) is a 16550A
Linux agpgart interface v0.103
i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
serio: i8042 KBD port at 0x60,0x64 irq 1
mousedev: PS/2 mouse device common for all mice
rtc_cmos 00:00: RTC can wake from S4
rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
rtc_cmos 00:00: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
Intel P-state driver initializing.
Intel pstate controlling: cpu 0
Intel pstate controlling: cpu 1
Intel pstate controlling: cpu 2
Intel pstate controlling: cpu 3
Intel pstate controlling: cpu 4
Intel pstate controlling: cpu 5
Intel pstate controlling: cpu 6
Intel pstate controlling: cpu 7
Intel pstate controlling: cpu 8
Intel pstate controlling: cpu 9
Intel pstate controlling: cpu 10
Intel pstate controlling: cpu 11
ledtrig-cpu: registered to indicate activity on CPUs
AMD IOMMUv2 driver by Joerg Roedel 
AMD IOMMUv2 functionality not available on this system
TCP: cubic registered
NET: Registered protocol family 10
mip6: Mobile IPv6
NET: Registered protocol family 17
mpls_gso: MPLS GSO support
registered taskstats version 1
rtc_cmos 00:00: setting system clock to 2016-04-15 23:53:42 UTC (1460764422)
PM: Hibernation image not present or could not be loaded.
Freeing unused kernel memory: 1204K (ffffffff818ee000 - ffffffff81a1b000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 912K (ffff88000171c000 - ffff880001800000)
Freeing unused kernel memory: 212K (ffff8800019cb000 - ffff880001a00000)
systemd-udevd[112]: starting version 215
random: systemd-udevd urandom read with 1 bits of entropy available
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
pps_core: LinuxPPS API ver. 1 registered
pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti 
PTP clock support registered
dca service started, version 1.12.1
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
SCSI subsystem initialized
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
ehci-pci: EHCI PCI platform driver
igb: Intel(R) Gigabit Ethernet Network Driver - version 5.0.5-k
igb: Copyright (c) 2007-2014 Intel Corporation.
xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
igb 0000:03:00.0: irq 73 for MSI/MSI-X
igb 0000:03:00.0: irq 74 for MSI/MSI-X
igb 0000:03:00.0: irq 75 for MSI/MSI-X
igb 0000:03:00.0: irq 76 for MSI/MSI-X
igb 0000:03:00.0: irq 77 for MSI/MSI-X
usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb1: Product: xHCI Host Controller
usb usb1: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb1: SerialNumber: 0000:00:14.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 15 ports detected
libata version 3.00 loaded.
xhci_hcd 0000:00:14.0: xHCI Host Controller
xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb2: Product: xHCI Host Controller
usb usb2: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb2: SerialNumber: 0000:00:14.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 3
xhci_hcd 0000:07:00.0: irq 78 for MSI/MSI-X
usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb3: Product: xHCI Host Controller
usb usb3: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb3: SerialNumber: 0000:07:00.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 4 ports detected
xhci_hcd 0000:07:00.0: xHCI Host Controller
xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 4
usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
ehci-pci 0000:00:1a.0: EHCI Host Controller
usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb4: Product: xHCI Host Controller
usb usb4: Manufacturer: Linux 3.16.0-4-amd64 xhci_hcd
usb usb4: SerialNumber: 0000:07:00.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 4 ports detected
ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 5
ehci-pci 0000:00:1a.0: debug port 2
ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
ehci-pci 0000:00:1a.0: irq 18, io mem 0xfb614000
ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb5: Product: EHCI Host Controller
usb usb5: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb5: SerialNumber: 0000:00:1a.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
ehci-pci 0000:00:1d.0: EHCI Host Controller
ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 6
ehci-pci 0000:00:1d.0: debug port 2
ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
ehci-pci 0000:00:1d.0: irq 18, io mem 0xfb613000
igb 0000:03:00.0: added PHC on eth0
igb 0000:03:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:03:00.0: eth0: (PCIe:2.5Gb/s:Width x1) fc:aa:14:dd:59:da
igb 0000:03:00.0: eth0: PBA No: 130916-002
igb 0000:03:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:04:00.0: irq 79 for MSI/MSI-X
igb 0000:04:00.0: irq 80 for MSI/MSI-X
igb 0000:04:00.0: irq 81 for MSI/MSI-X
igb 0000:04:00.0: irq 82 for MSI/MSI-X
igb 0000:04:00.0: irq 83 for MSI/MSI-X
ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
usb usb6: New USB device found, idVendor=1d6b, idProduct=0002
usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
usb usb6: Product: EHCI Host Controller
usb usb6: Manufacturer: Linux 3.16.0-4-amd64 ehci_hcd
usb usb6: SerialNumber: 0000:00:1d.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: irq 84 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x1 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
ata1: SATA max UDMA/133 abar m2048@0xfb612000 port 0xfb612100 irq 84
ata2: DUMMY
ata3: DUMMY
ata4: DUMMY
ata5: DUMMY
ata6: DUMMY
igb 0000:04:00.0: added PHC on eth1
igb 0000:04:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:04:00.0: eth1: (PCIe:2.5Gb/s:Width x1) fc:aa:14:dd:59:db
igb 0000:04:00.0: eth1: PBA No: 130916-002
igb 0000:04:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:05:00.0: irq 85 for MSI/MSI-X
igb 0000:05:00.0: irq 86 for MSI/MSI-X
igb 0000:05:00.0: irq 87 for MSI/MSI-X
igb 0000:05:00.0: irq 88 for MSI/MSI-X
igb 0000:05:00.0: irq 89 for MSI/MSI-X
igb 0000:05:00.0: added PHC on eth2
igb 0000:05:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:05:00.0: eth2: (PCIe:2.5Gb/s:Width x1) fc:aa:14:dd:59:dc
igb 0000:05:00.0: eth2: PBA No: 130916-002
igb 0000:05:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
igb 0000:06:00.0: irq 90 for MSI/MSI-X
igb 0000:06:00.0: irq 91 for MSI/MSI-X
igb 0000:06:00.0: irq 92 for MSI/MSI-X
igb 0000:06:00.0: irq 93 for MSI/MSI-X
igb 0000:06:00.0: irq 94 for MSI/MSI-X
igb 0000:06:00.0: added PHC on eth3
igb 0000:06:00.0: Intel(R) Gigabit Ethernet Network Connection
igb 0000:06:00.0: eth3: (PCIe:2.5Gb/s:Width x1) fc:aa:14:dd:59:dd
igb 0000:06:00.0: eth3: PBA No: 130916-002
igb 0000:06:00.0: Using MSI-X interrupts. 4 rx queue(s), 4 tx queue(s)
usb 1-7: new low-speed USB device number 2 using xhci_hcd
ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
ata1.00: ATA-8: WDC WD5003ABYZ-011FA0, 01.01S03, max UDMA/133
ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access     ATA      WDC WD5003ABYZ-0 1S03 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1 sda2 sda3
sd 0:0:0:0: [sda] Attached SCSI disk
sd 0:0:0:0: Attached scsi generic sg0 type 0
usb 1-7: New USB device found, idVendor=0461, idProduct=4d65
usb 1-7: New USB device strings: Mfr=0, Product=2, SerialNumber=0
usb 1-7: Product: USB Optical Mouse
usb 1-7: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
input: USB Optical Mouse as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/0003:0461:4D65.0001/input/input1
hid-generic 0003:0461:4D65.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Mouse] on usb-0000:00:14.0-7/input0
usb 1-10: new high-speed USB device number 3 using xhci_hcd
device-mapper: uevent: version 1.0.3
device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: dm-devel@redhat.com
usb 1-10: New USB device found, idVendor=0624, idProduct=0248
usb 1-10: New USB device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-10: Product: Gadget USB HUB
usb 1-10: Manufacturer: no manufacturer
usb 1-10: SerialNumber: 0123456789
hub 1-10:1.0: USB hub found
hub 1-10:1.0: 5 ports detected
PM: Starting manual resume from disk
PM: Hibernation image partition 254:1 present
PM: Looking for hibernation image.
PM: Image not found (code -22)
PM: Hibernation image not present or could not be loaded.
tsc: Refined TSC clocksource calibration: 2399.997 MHz
usb 5-1: new high-speed USB device number 2 using ehci-pci
EXT4-fs (dm-0): mounted filesystem with ordered data mode. Opts: (null)
usb 5-1: New USB device found, idVendor=8087, idProduct=800a
usb 5-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 5-1:1.0: USB hub found
hub 5-1:1.0: 6 ports detected
usb 6-1: new high-speed USB device number 2 using ehci-pci
usb 6-1: New USB device found, idVendor=8087, idProduct=8002
usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
hub 6-1:1.0: USB hub found
hub 6-1:1.0: 8 ports detected
usb 1-10.1: new high-speed USB device number 4 using xhci_hcd
usb 1-10.1: New USB device found, idVendor=0624, idProduct=0249
usb 1-10.1: New USB device strings: Mfr=4, Product=5, SerialNumber=6
usb 1-10.1: Product: Keyboard/Mouse Function
usb 1-10.1: Manufacturer: Avocent
usb 1-10.1: SerialNumber: 20121018
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1:1.0/0003:0624:0249.0002/input/input2
hid-generic 0003:0624:0249.0002: input,hidraw1: USB HID v1.00 Keyboard [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-10.1/input0
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1:1.1/0003:0624:0249.0003/input/input3
hid-generic 0003:0624:0249.0003: input,hidraw2: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-10.1/input1
input: Avocent Keyboard/Mouse Function as /devices/pci0000:00/0000:00:14.0/usb1/1-10/1-10.1/1-10.1:1.2/0003:0624:0249.0004/input/input4
hid-generic 0003:0624:0249.0004: input,hidraw3: USB HID v1.00 Mouse [Avocent Keyboard/Mouse Function] on usb-0000:00:14.0-10.1/input2
Switched to clocksource tsc
random: nonblocking pool is initialized
systemd[1]: Cannot add dependency job for unit NetworkManager-wait-online.service, ignoring: Unit NetworkManager-wait-online.service failed to load: No such file or directory.
fuse init (API version 7.23)
systemd-udevd[272]: starting version 215
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input5
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
ACPI: Power Button [PWRF]
ipmi message handler version 39.2
IPMI System Interface driver.
ipmi_si: probing via ACPI
ipmi_si 00:07: [io  0x0ca2] regsize 1 spacing 1 irq 0
ipmi_si: Adding ACPI-specified kcs state machine
ipmi_si: probing via SMBIOS
ipmi_si: SMBIOS: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SMBIOS-specified kcs state machine duplicate interface
ipmi_si: probing via SPMI
ipmi_si: SPMI: io 0xca2 regsize 1 spacing 1 irq 0
ipmi_si: Adding SPMI-specified kcs state machine duplicate interface
ipmi_si: Trying ACPI-specified kcs state machine at i/o address 0xca2, slave address 0x0, irq 0
mei_me 0000:00:16.0: Device doesn't have valid ME Interface
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
power_meter ACPI000D:00: Found ACPI power meter.
power_meter ACPI000D:00: Ignoring unsafe software power cap!
EXT4-fs (dm-0): re-mounted. Opts: errors=remount-ro
ipmi_si 00:07: Found new BMC (man_id: 0x003c0a, prod_id: 0x0104, dev_id: 0x20)
ipmi_si 00:07: IPMI kcs interface initialized
wmi: Mapper loaded
i801_smbus 0000:00:1f.3: enabling device (0000 -> 0003)
i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
EFI Variables Facility v0.08 2004-May-17
[drm] Initialized drm 1.1.0 20060810
input: PC Speaker as /devices/platform/pcspkr/input/input7
[drm] AST 2400 detected
[drm] dram 1632000000 1 16 01000000
[TTM] Zone  kernel: Available graphics memory: 16448120 kiB
[TTM] Zone   dma32: Available graphics memory: 2097152 kiB
[TTM] Initializing pool allocator
[TTM] Initializing DMA pool allocator
iTCO_vendor_support: vendor-support=0
checking generic (fa000000 1d5000) vs hw (fa000000 1000000)
fb: switching to astdrmfb from simple
Console: switching to colour dummy device 80x25
fbcon: astdrmfb (fb0) is primary device
Console: switching to colour frame buffer device 240x67
ast 0000:09:00.0: fb0: astdrmfb frame buffer device
ast 0000:09:00.0: registered panic notifier
[drm] Initialized ast 0.1.0 20120228 for 0000:09:00.0 on minor 0
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
iTCO_wdt: unable to reset NO_REBOOT flag, device disabled by hardware/BIOS
AVX2 version of gcm_enc/dec engaged.
alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
alg: No test for crc32 (crc32-pclmul)
Adding 53100540k swap on /dev/mapper/zakel--vg-swap_1.  Priority:-1 extents:1 across:53100540k FS
intel_rapl: Found RAPL domain package
intel_rapl: Found RAPL domain dram
EXT4-fs (sda2): mounting ext2 file system using the ext4 subsystem
EXT4-fs (sda2): mounted filesystem without journal. Opts: (null)
FAT-fs (sda1): utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
EXT4-fs (dm-2): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: (null)
EXT4-fs (dm-4): mounted filesystem with ordered data mode. Opts: (null)
systemd-journald[269]: Received request to flush runtime journal from PID 1
ip_tables: (C) 2000-2006 Netfilter Core Team
nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
FS-Cache: Loaded
FS-Cache: Netfs 'nfs' registered for caching
Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
vboxdrv: Found 12 processor cores
vboxdrv: TSC mode is Invariant, tentative frequency 2400000255 Hz
vboxdrv: Successfully loaded version 5.0.16 (interface 0x00240000)
VBoxNetFlt: Successfully started.
VBoxNetAdp: Successfully started.
VBoxPciLinuxInit
vboxpci: IOMMU not found (not registered)
igb 0000:03:00.0 eth0: igb: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX/TX
IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
capability: warning: `VBoxHeadless' uses 32-bit capabilities (legacy support in use)
SUPR0GipMap: fGetGipCpu=0x3
vboxdrv: ffffffffa065f020 VMMR0.r0
IPv6: ADDRCONF(NETDEV_UP): vboxnet0: link is not ready
VBoxNetFlt: attached to 'vboxnet0' / 0a:00:27:00:00:00
IPv6: ADDRCONF(NETDEV_CHANGE): vboxnet0: link becomes ready
device vboxnet0 entered promiscuous mode
vboxdrv: ffffffffa075e020 VBoxDDR0.r0
vboxdrv: ffffffffa00f7020 VBoxDD2R0.r0
vboxdrv: ffffffffa001f020 VBoxEhciR0.r0

Return To xeon x264 System Information